Quantcast

Carat Weight of a Cabochon Tigers Eye

Last modified by
on
Sep 16, 2024, 6:58:41 PM
Created by
on
Feb 18, 2020, 11:54:55 PM
`Wt = f( L , W , D , 0.0026 , 0 %)`
`(L)"Length of Gem"`
`(W)"Width of Gem"`
`(D)"Depth of Gem"`
`(CPF)"Cabochon Profile Factor"`
`(B)"Percent of bulge"`
Tags
UUID
103be39e-52aa-11ea-a7e4-bc764e203090

The Carat Weight of a Cabochon Tigers Eye gem calculator computes the carat weight based on the specific gravity of Tigers Eye and its dimensions including a cabochon factor.   

INSTRUCTIONS: Choose units and enter the following:

  • (L) length of Gem
  • (W) width of Gem
  • (D) depth of Gem
  • (CPF) Cabochon Profile Factor /attachments/103be39e-52aa-11ea-a7e4-bc764e203090/CabochonDimensions.png/attachments/103be39e-52aa-11ea-a7e4-bc764e203090/Cabochon Chart.png             Cabochon Profile Factor Table 
  • (B) Percent bulge 

Cabochon Tigers Eye Weight (Wt): The calculator returns the weight in carats.   However, this can be automatically converted to compatible units via the pull-down menu.

The Math / Science

The formula for the carat weight of a tigers eye cabochon is:

   weight = len * wid * dep * sg * CPF * bul

where:

  • weight = carat weight of a emerald
  • len = length of the gem
  • wid = width of the gem
  • dep = depth of the gem
  • sg = specific gravity of the tigers eye (nominally 2.68 for estimates.  Range: 2.64 to 2.71) 
  • CPF = Cabochon Profile Factor
  • bul = bulge factor 

The formula approximates the volume of the gem.  The specific gravity is used with the volume estimate to estimate the carat weight.


Cabochon Gem Weight Calculators


Gemstone Carat Weight Calculator:

Types of Gems

The gems supported in gemstone carat weight calculator include the following:

Agate, Alexandrite, Almandite garnet, Amethyst, Andalusite, Aquamarine, Aventurine, Beryl, Bloodstone, Blue Topaz, Carnelian, Cats eye, Chalcedony, Chrysoberyl, Citrine, Corundum, Demantoid Garnet, Diamond, Emerald, Golden beryl, Green beryl, Jadeite, Kunzite, Lapis Lazuli, Morganite, Nephrite Jade, Onyx, Opal, Precious topaz, Pyrope garnet, Quartz, Rhodolite garnet, Rose Quartz, Ruby, Sapphire, Sardonyx, Smokey quartz, Spessartite garnet, Spinel, Tanzanite, Topaz, Tourmaline, Tsavorite garnet, Turquoise, Yellow topaz, Zircon


ACCURACY COMPARISON

The carat weight equations and data used in vCalc's jewelry library and calculator were reviewed by a certified gemologist.   The equations are based on industry recognized formulas and data.  The table below shows a comparison of computations between vCalc and an industry accepted application (Quantum Leap).

The length, width and depth are in millimeters (mm), and the Quantum Leap and vCalc measurements are in carats (cwt).

Carat weight calculation comparison

The largest variance, an oval faceted alexandrite, which can be seen in the last row above, has been double checked against several source equations which tend to support vCalc's accuracy.


  • Comments
  • Attachments
  • Stats
No comments
This site uses cookies to give you the best, most relevant experience. By continuing to browse the site you are agreeing to our use of cookies.